XenServer Build on HP Hardware
Disable the Following:
Set Power Management to Performance
Under the following “Power, Advanced Power, Minimum Processor Idle Power State”
- Under Power Management Disable ALL C-States
HP power regulator
- OS Control Mode.
To get the RAID Controller menu on post press F8 this will load the LightOut configuration
Exit out, and now you should see the RAID being initialized. Press F8 to run the RAID Configuration utility
Create Logical Drive
RAID 1+0, No hot spare and ALL Drives are part of the RAID.
Local Disk Thin Provisioned Optimized
Password “Choose one”
Eth0 – Auto
Hostname Xen01, xen02, xen03, etc…. xen06
DNS – auto
America Whatever country you want
Los Angeles Whatever Time Zone is Closest you want
Manual Time entry
Remove media and Reboot
BURN IN Atleast 2-5 days.